The fast and clean Dual Extruder by Wasp The ZEN Extruder is the solution for a faster and accurate double extrusion 3D print. Featuring the configurable Spitfire System and a totally mechanical tippable switch it contains all the best of WASP technology.
Delta WASP extruder, with filament driver for 1.75 mm filament.
2 ZEN LT Cartridges with 0.4 mm steel nozzle as standard to print at low temperatures.
Important: only the Delta WASP 2040 Turbo2 and Delta WASP 4070 Industrial printers are available with the ZEN Dual Extruder – (to be requested at the time of order).
The ZEN LT and HT cartridges are also available with a 0.7 / 1.2 mm nozzle (note: they are different from the ones of the Spitfire System because they have a different coupler diameter).
The WASP double extruder is designed to meet the needs of those customers who want to print using two different materials, insert supports; use two different types of materials that require different temperatures; two different nozzle diameters, or two different filament colours.
ZEN Extruder is the solution for faster, more accurate 3D printing with double extrusion.
The ZEN Extruder adopts the configurable architecture of the new Spitfire System and, thanks to a mechanical switching system of the extruder that is printing, it incorporates all the best of WASP technology.
Stop & Clean anti-oozing flaps
The innovative anti-drip flap, when the second extruder is activated, immediately cleans the nozzle that is deactivated without requiring the whole extrusion system to move to the perimeter of the print surface at each extruder change, to allow the dripping of molten material inside the just used nozzle. This innovative solution allows significant time savings during the whole printing process.
Motor-free switching system
The exchange system between an extruder and the other is mechanically performed without the need for additional servomechanisms through a variable height tilting solution for a faster and more reliable printing.
The cartridge (consisting of nozzle, barrel and coupler) is the heart of the Spitfire System and gives the new WASP extrusion system maximum modularity and versatility. From now on, the extruder can be configurable, depending on the different printing needs.
Two types of cartridges have been designed to meet all your needs:
LT ZEN Cartridge with teflon to print at low temperature (indicated for PLA; PETG and FLEX) HT ZEN Cartridge without teflon to print at high temperature (suggested for ABS; PA; PC; HIPS; PA+C; ASA; PMMA and PP)